Specification:
1. Voltage:48V
2. Capacity: 10AH
3. Lifespan: more than 800times.
4. Size: 91mm(Diameter) X 410mm(Length).
5. Discharging temperature:- 20 °C to 60 °C
6. Charging temperature: 0 °C to 45 °C
7. Storage temperature: -20 °C to 40 °C
BMS Specification:
1. Operating current: 25A
2. Peak current: 50A±5A
3. Charging current: 2-5A
4. Over-voltage protection: 4.2 V
5. Under-voltage protection: 3.0 V
6. Cells Balancing function: Yes
7. Output port:P+ / P
8. Charge port:C+ / C
Characteristics:
NO. Item Requirements Test Method
1 Discharge
Characteristics Discharge capacity
Nominal capacity×100%
A)0.2C5A ≥100%
B)0.5C5A ≥98%
C)1C5A ≥95% Standard charge at 0.2C5A under the condition of normal atmospheric pressure and the environmental temperature of 25°C±5°C and 45%~80% RH(unless otherwise specified, storage and charging should be conducted as this regime), then rest for 10min and discharge at 0.2C5A,0.5C5A,1C5A to 30V respectively. Charge/discharge cycle can be conducted for 3 times before meeting the Standards(the same below).
2 Normal Storage Residual Capacity≥Nominal capacity*85%
Recoverable capacity≥Nominal capacity *90%
OCV decrease≤3%
impendance increase ≤20% Measure initial status and initial capacity. Store for 28 days after standard charge, then measure final status and residual capacity at 0.2C5A to 30.0V; After charge/discharge(1C/0.5C) cycle can be conducted for 3 times , measure the recoverable capacity before meeting the Standards(the same below).
3 Cycle Life Discharge Capacity≥Nominal apacity*60% 0.5C discharger Measure initial status and initial capacity, then conduct 0.5C discharge cycle for 800 times . Measure last status and last capacity 60%
1. Voltage:48V
2. Capacity: 10AH
3. Lifespan: more than 800times.
4. Size: 91mm(Diameter) X 410mm(Length).
5. Discharging temperature:- 20 °C to 60 °C
6. Charging temperature: 0 °C to 45 °C
7. Storage temperature: -20 °C to 40 °C
BMS Specification:
1. Operating current: 25A
2. Peak current: 50A±5A
3. Charging current: 2-5A
4. Over-voltage protection: 4.2 V
5. Under-voltage protection: 3.0 V
6. Cells Balancing function: Yes
7. Output port:P+ / P
8. Charge port:C+ / C
Characteristics:
NO. Item Requirements Test Method
1 Discharge
Characteristics Discharge capacity
Nominal capacity×100%
A)0.2C5A ≥100%
B)0.5C5A ≥98%
C)1C5A ≥95% Standard charge at 0.2C5A under the condition of normal atmospheric pressure and the environmental temperature of 25°C±5°C and 45%~80% RH(unless otherwise specified, storage and charging should be conducted as this regime), then rest for 10min and discharge at 0.2C5A,0.5C5A,1C5A to 30V respectively. Charge/discharge cycle can be conducted for 3 times before meeting the Standards(the same below).
2 Normal Storage Residual Capacity≥Nominal capacity*85%
Recoverable capacity≥Nominal capacity *90%
OCV decrease≤3%
impendance increase ≤20% Measure initial status and initial capacity. Store for 28 days after standard charge, then measure final status and residual capacity at 0.2C5A to 30.0V; After charge/discharge(1C/0.5C) cycle can be conducted for 3 times , measure the recoverable capacity before meeting the Standards(the same below).
3 Cycle Life Discharge Capacity≥Nominal apacity*60% 0.5C discharger Measure initial status and initial capacity, then conduct 0.5C discharge cycle for 800 times . Measure last status and last capacity 60%